Friday, 27 October 2017

COMMON MISTAKES TO AVOID WHEN USING THERMAL CONDUCTIVE PASTE


There’s a bit of a trick for everything, even with PCB assembly processes that follow an otherwise straightforward and to-the-point approach. This blog post has been designed with a similar standpoint – a glance into the common mistakes that should be avoided when using thermal conductive paste. With factors listed here, you can prevent various process issues and make your overall operations much more productive.

Mistake# Ignoring electrical conductivity
While thermal conductive paste is available in various varieties like diamond based, silicon based, carbon based and ceramic based compounds, metal based paste is widely considered to be the most suitable, owing to its excellent thermal conductivity parameters and affordable price. However, metal based compounds also have an inherent capability of carrying a charge which can end up damaging your PCB components if left unaccounted for. So, if you are using a metal based thermal conductive paste, make sure you do not apply it in too copious quantities.

Mistake# Not cleaning the surfaces before application
The reason of applying thermal conductive paste is to remove irregularities and lessen the distance between the circuit board and the heat-sink, to ensure a better, cleaner and a more constant connection between the two. Therefore, while applying the paste, you should make sure that both surfaces are completely free of contaminants, dust, dirt, grime or any other form of residue. The most common method used to clean surfaces is rubbing alcohol which can carefully remove all impurities without causing any damage to the board and its components.

Mistake# Applying too much or too little paste
Too much thermal conductive paste can detract from its effectiveness and performance as a thick layer will increase the distance between the circuit board and the heat-sink, thereby hindering the heat transference process. Too little paste will also not fulfill the purpose as air pockets and gaps will remain behind. The idea is to apply an even, optimal layer of paste, covering as much surface area of the board as possible.

Use the above information to tweak your method of thermal conductive paste application and get the most from your device performance.

Thursday, 26 October 2017

WHAT ARE THE ELEMENTS YOU CAN RECYCLE FROM PCBs?


Rising electronic waste and its ill-effects on the environment are quickly becoming some of the biggest challenges that our generation is currently facing. Thankfully, options like recycling PCB components are becoming widely available and are allowing manufacturers to reduce their carbon footprint and steer the industry towards a more sustainable future. This blog post will help explain the viability and value derived from PCB recycling.

Here is a list of all the elements that you can effectively recycle from a PCB.

Dross: Soldering of components can often produce a lot of oxidized waste alloy that can no longer be used on the PCB being manufactured. This oxidized metal, known as dross, can be effectively refined and purified for reuse through recycling of PCB components.


Precious metals: Most electronic components and circuit boards make use of precious metals like gold, silver, palladium, platinum and such for various purposes and applications. Scrap PCBs can be effectively recycled through electrolytic refining processes for extracting residual quantities of these metals which can later be used again in further manufacturing/processing.

Other metals: The large variety of industrial components found on a PCB can also be recycled to reclaim metals like tin, bismuth, lead and different alloys. Reclaiming of these metals involves careful processing of parts like radiator drips, scrap alloys, solder paste and more.

Anode butts: High metallic return is usually expected from the recycling of this part of a PCB. The part of the anode that is left behind post completion of the electroplating process is usually free from contaminants and can yield residual metals in an extremely cost effective manner.

The law now completely prohibits the dumping of printed circuit boards in landfills to prevent the ill effects of residual metals on the ecology. With the option of recycling PCB components, there is now a viable means to extract true value from this scrap and prevent further damage caused to the environment.

THE CHALLENGES IN SOLAR CELL TABBING


Solar panel is an assembly of solar cells that synthesizes the sunlight into electricity. As a solar panel is an assembly of many solar cells, it requires internal connections/wiring between these solar cells known as tabbing. In order to get the highest possible output from a solar photovoltaic installation, it is necessary for the solar cells to be tabbed with care. In this blog, you will learn about the challenges in solar cell tabbing.


Challenge #1: Positioning
The tabbing ribbon or wire, including the bus ribbon or wire, has to be positioned precisely on the solar cells. Tabbing wires collect the power generated in the cell and send it to the bus ribbon – which means that achieving the optimum area of collection for each tabbing ribbon would help achieve the maximum output from the solar panels. One solution to this is using computerized operations.

Challenge #2: Continuity
It is important to achieve seamless tabbing which is continuous. Breakage in soldering tabbing wire onto a solar cell can result in poor efficiency. Challenging as it is, fair amount of concentration can help you get tabbing right.

Challenge #3: Quantity
Getting the right amount of tabbing wires on each cell helps optimize collection of current. Too much tabbing results in wastage of cell area that could otherwise have produced electricity.

While solar panel assemblies can be challenging, above mentioned simple tabbing solutions can help optimize the process.

Monday, 28 August 2017

What Every PCB Engineer Should Know About PCB Stencils

The world of electronics manufacturing would be considered pretty much incomplete without PCB stencil technology. While printed circuit boards or PCBs have become the foundation for all kinds of electronics devices and applications, stenciling is the catalyst that has made its production process more commercially viable and effective on an industrial scale. So if you are an engineer, it is your utmost duty to know as much as you can about PCB stencils. This blog post will provide you with an initial glimpse.

The process of PCB manufacturing involves application of solder paste on the circuit board or substrate upon which the electrical connections and components will later be placed and secured. This solder paste creates a firm and reliable bond through which electricity will flow, making the PCB functional, thereby getting the electronic device in question to run.    

As an engineer, you will definitely appreciate the challenge that this step of the manufacturing process poses. Whether for a single PCB creation or for industrial scale manufacturing, an engineer needs to ensure that the solder paste goes exactly where it is intended to be on the substrate. Even the slightest straying from the decided path or inadvertent leaks/spreads can cause unintended bridging and faults in the circuit, causing the PCB to fail. PCB stencils are designed and printed to avoid these issues, allowing for accurate, effective and reliable production of circuit boards on a mass scale.

Using PCB stencils in the electronics manufacturing process is quite easy to understand. The stencil is crafted in accordance with the PCB design relevant to the application. For paste application, the stencil is placed on the substrate and the fluid-like solder is squeegeed onto its surface. The pathways and holes in the stencil dictate the exact position where the solder paste needs to be at. The components of the circuit are placed next onto the substrate in a way that the solder paste secures them firmly in place. The stencil is then carefully removed and the process is complete.

PCB stencils have, in a way, improved the precision and effectiveness of the surface mounted technology manufacturing process singlehandedly. The importance of stencils can therefore, never be over-emphasized for a PCB engineer.

Things to Know About Surface Mount Adhesives

Soldering is now the standard method of making an electrical connection in all kinds of electronic devices. The printed circuit boards that are used to set up circuit for these devices are created after much effort. The printed circuit board is an assembly of components which make up a circuit. While setting up a circuit, there is something required to hold the components in place before they are soldered on. Surface mount adhesive serve this purpose very well – it holds all the components in place while soldering is performed.

Surface mount adhesive is highly effective in wave soldering techniques. In fact, it is highly popular in wave soldering. With the transition of soldering techniques from through-hole to surface mount soldering, it became increasingly important to keep the components in place while they are soldered. Just about any glue could not be used for the fear of impurities and oxidation. Surface mount adhesives are a special glue that does not interfere with soldering process.

The interesting fact is that surface mount adhesives are evolving, and have been developed further to be compatible with lead-free soldering as well. In addition to wave soldering, these adhesives can also be used with surface mount technique. Compatibility of these adhesives with liquid fluxes has also been achieved.

Surface mount adhesives can be deposited on the printed circuit board using many methods – jetting, needle dispensing method and stencil printing. Research is still ongoing regarding performance of these adhesives with various fluxes and flux-cored solder wires.

These adhesives have greatly improved accuracy of printing circuit boards. Pasting the components accurately in place ensures error-free connections.